トップページ | 2011年4月 »

2011年3月

2011年3月26日 (土)

mmcblk3の領域

LifeTouch Noteの内蔵ディスク領域を調べてみた。
カーネルコマンドラインに渡されているパラメーターにtegrapartというのがある。
以下はその抜粋

tegrapartの内容

  • pt:600:80:800
  • bootloader:680:400:800
  • fdt:1180:12c00:800
  • recovery:13d80:a00:800
  • boot:14800:1000:800
  • mbr:b80:200:800
  • system:15880:18000:800
  • cache:2d900:12c00:800
  • misc:d80:400:800
  • staging:40580:1f400:800
  • userdata:5fa00:35b600:800

内部で実際にマウントしているディレクトリはこれ
/dev/block/mmcblk3p6    /system
/dev/block/mmcblk3p9    /data
/dev/block/mmcblk3p7    /cache
/dev/block/mmcblk3p1    /misc

mmcblk3のパーティションテーブル(LBAで記載、SIZEはセクタ)

  • P1:Linux(83h)、LBA:00000800、SIZE:00001000
  • P2:Linux(83h)、LBA:00001800、SIZE:0004B000
  • P3:Linux(83h)、LBA:0004C800、SIZE:00002800
  • P4:拡張(05h)、LBA:0004F000、SIZE:00EA6240

拡張パーティションの中身(LBA)

  • P5:Linux(83h)、LBA:0004F200、SIZE:00004000
  • P6:Linux(83h)、LBA:00053400、SIZE:00060000
  • P7:Linux(83h)、LBA:000B3600、SIZE:0004B000
  • P8:Linux(83h)、LBA:000FE800、SIZE:0007D000
  • P9:Linux(83h)、LBA:0017BA00、SIZE:00D6D800

P6に/systemが入っているはずなので
tegrapartのsystemをバイト位置にすると0AC40000
P6をバイト位置にすると0A680000
うーん合わない。
じゃtegrapartのmiscをバイト位置にすると6C0000
P1をバイト位置にすると100000
違う。

ANDROIDのimgを探してみた(ヘッダがANDROID!)。
すると、recovery.imgはP3に、boot用カーネルとrootfsはP5にあるのがわかった。
P6は/systemなので、これらをバックアップしておけば安心だろう。
P3の内容と、P5の内容にはzImageやrootfsがあるので抜き出して改変することも可能か。


| コメント (0) | トラックバック (0)

2011年3月21日 (月)

LifeTouch Noteを購入

NECのLifeTouch Noteを購入した。
3GはなしのWifiモデル(LT-NA75W)。
Dynabook AZにしようかとも思ったがこっちにした。
で、過去にSharpのZaurusを使ってきて、
SharpのZaurusでスペシャルカーネルを入れたり、
Zaurus内臓のマイクロドライブをもうちょっと容量が大きいのに換装したりもした。
Zaurusのハードウェア情報も公開されていたり、有志によるハードウェア/ソフトウェア解析も結構されていたのでよかった。
今はAndroid。
巷ではスマートフォンにカスタムROMを入れたりRoot化したりしている人もいるようだし何かしてみようと思う。
とりあえず、日経Linux 2011/1月号に、「Android搭載機Dynabook AZを改造する」
という記事があり、バックナンバーとして購入した。
Tegra用のツールでnvflashというのを使用して、内臓フラッシュのイメージをバックアップする方法や、root化。dynabook AZでubuntuを動かす方法が記事になっていて参考になった。
Lifetouch Noteは、発売まもないこともあり、こういうハッキング的な情報はまだないが、調べてわかったことをメモしておく。

Android system recovery 3e メニュー
上部の緑色のホームボタンを押しながら電源ON
画面が出てきたら、ホームボタンをもう一度押すと、リカバリー用メニューが表示される

fastboot usb download モード?
上部の戻るボタン(Insertの隣)を押しながら電源ON
画面にfastboot usb download のような表示がでるのでそのモードになっていると思う。
fastboot reboot
とPCから入力すればLifetouch Noteがrebootしたので、いちおう効いているのだろう。

今日はここまで。


| コメント (0) | トラックバック (0)

LifeTouch Noteのパーティーション(mmcblk3)

# fdisk /dev/block/mmcblk3

The number of cylinders for this disk is set to 977184.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/block/mmcblk3: 8005 MB, 8005091328 bytes
1 heads, 16 sectors/track, 977184 cylinders
Units = cylinders of 16 * 512 = 8192 bytes

              Device Boot      Start         End      Blocks  Id System
/dev/block/mmcblk3p1             129         384        2048  83 Linux
Partition 1 does not end on cylinder boundary
/dev/block/mmcblk3p2             385       19584      153600  83 Linux
Partition 2 does not end on cylinder boundary
/dev/block/mmcblk3p3           19585       20224        5120  83 Linux
Partition 3 does not end on cylinder boundary
/dev/block/mmcblk3p4           20225      980260     7680288   5 Extended
Partition 4 does not end on cylinder boundary
/dev/block/mmcblk3p5           20257       21280        8192  83 Linux
/dev/block/mmcblk3p6           21313       45888      196608  83 Linux
/dev/block/mmcblk3p7           45921       65120      153600  83 Linux
/dev/block/mmcblk3p8           65153       97152      256000  83 Linux
/dev/block/mmcblk3p9           97185      977184     7040000  83 Linux

マウント情報

# mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
/dev/block/mmcblk3p2 /fdt ext3 ro,relatime,data=ordered 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
/dev/block/mmcblk3p6 /system ext2 ro,relatime 0 0
/dev/block/mmcblk3p9 /data ext3 rw,nosuid,nodev,relatime,data=ordered 0 0
/dev/block/mmcblk3p7 /cache ext3 rw,nosuid,nodev,relatime,data=ordered 0 0
/dev/block/mmcblk3p1 /misc ext3 rw,nosuid,nodev,relatime,data=ordered 0 0
/dev/block/vold/179:33 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:33 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0

| コメント (0) | トラックバック (0)

LifeTouch NoteのLinuxカーネル機動メッセージ(/proc/kmsg)

<5>[    0.000000] Linux version 2.6.32.9-00044-g2b64cc5 (nec@Bryony) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Tue Jan 18 15:36:51 CST 2011

<4>[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: NVIDIA Harmony Development System
<4>[    0.000000] Framebuffer tag with 65536 handle
<4>[    0.000000] Shmoo tag with 65537 handle
<4>[    0.000000] Found a warmboot tag!
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 98304
<7>[    0.000000] free_area_init_node: node 0, pgdat c05ab940, node_mem_map c0698000
<7>[    0.000000]   DMA zone: 768 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 97536 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c09a4000 s11040 r8192 d13536 u65536
<6>[    0.000000] pcpu-alloc: s11040 r8192 d13536 u65536 alloc=16*4096
<6>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
<5>[    0.000000] Kernel command line: mem=384M@0M nvmem=128M@384M vmalloc=256M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 no_console_suspend tegraboot=sdmmc tegrapart=pt:600:80:800,bootloader:680:400:800,fdt:1180:12c00:800,recovery:13d80:a00:800,boot:14800:1000:800,mbr:b80:200:800,system:15880:18000:800,cache:2d900:12c00:800,misc:d80:400:800,staging:40580:1f400:800,userdata:5fa00:35b600:800
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 384MB = 384MB total
<5>[    0.000000] Memory: 382464KB available (5344K code, 1186K data, 172K init, 0K highmem)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:416
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    4.609343] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
<4>[    4.879342] Mount-cache hash table entries: 512
<6>[    4.879719] CPU: Testing write buffer coherency: ok
<6>[    4.879905] Calibrating local timer... 1.19MHz.
<4>[    4.989399] CPU1: Booted secondary processor
<6>[    5.259196] Brought up 2 CPUs
<6>[    5.259210] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
<7>[    5.259231] CPU0 attaching sched-domain:
<7>[    5.259242]  domain 0: span 0-1 level CPU
<7>[    5.259251]   groups: 0 1
<7>[    5.259268] CPU1 attaching sched-domain:
<7>[    5.259276]  domain 0: span 0-1 level CPU
<7>[    5.259284]   groups: 1 0
<6>[    5.283005] regulator: core version 0.5
<6>[    5.283388] NET: Registered protocol family 16
<4>[    5.283724] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x3 SKU: 0x8
<4>[    5.284366] NVRM Got shmoo boot argument (at 0xd8874004)
<4>[    5.284378] NVRM corner (2, 1)
<4>[    5.439163] NVRM CLOCKS: PLLX0:      1000000 Khz
<4>[    5.439174] NVRM CLOCKS: PLLM0:      666000 Khz
<4>[    5.439181] NVRM CLOCKS: PLLC0:      600000 Khz
<4>[    5.439187] NVRM CLOCKS: PLLP0:      216000 Khz
<4>[    5.439193] NVRM CLOCKS: PLLA0:      11289 Khz
<4>[    5.439199] NVRM CLOCKS: CPU:        1000000 Khz
<4>[    5.439205] NVRM CLOCKS: AVP:        240000 Khz
<4>[    5.439211] NVRM CLOCKS: System Bus: 240000 Khz
<4>[    5.439220] NVRM CLOCKS: Memory Controller: 333000
<4>[    5.439229] NVRM CLOCKS: External Memory Controller: 666000
<6>[    5.617532] regulator: lbee9qmb_vdd: 1700 <--> 2000 mV
<6>[    5.617800] regulator: soc_main: 0 mV
<6>[    5.618078] regulator: vddio bb: 1700 <--> 2000 mV
<6>[    5.618342] regulator: vddio lcd: 1700 <--> 2000 mV
<6>[    5.618607] regulator: vddio vi: 1700 <--> 2000 mV
<6>[    5.618868] regulator: vddio uart: 1700 <--> 2000 mV
<6>[    5.619172] regulator: vddio ddr: 1700 <--> 2000 mV
<6>[    5.619475] regulator: vddio nand: 1700 <--> 2000 mV
<6>[    5.619755] regulator: vddio sys: 1700 <--> 2000 mV
<6>[    5.620026] regulator: vddio audio: 1700 <--> 2000 mV
<6>[    5.620302] regulator: vddio sd: 1700 <--> 2000 mV
<4>[    5.626762] ADJUSTED CLOCKS:
<4>[    5.626776] MC clock is set to 333000 KHz
<4>[    5.626787] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
<4>[    5.626795] PLLX0 clock is set to 1000000 KHz
<4>[    5.626801] PLLC0 clock is set to 600000 KHz
<4>[    5.626807] CPU clock is set to 1000000 KHz
<4>[    5.626813] System and AVP clock is set to 240000 KHz
<4>[    5.626822] GraphicsHost clock is set to 111000 KHz
<4>[    5.626829] 3D clock is set to 111000 KHz
<4>[    5.626836] 2D clock is set to 111000 KHz
<4>[    5.626844] Epp clock is set to 111000 KHz
<4>[    5.626851] Mpe clock is set to 111000 KHz
<4>[    5.626857] Vde clock is set to 240000 KHz
<4>[    5.649426] Local timer scaling factor 2097, shift 24
<6>[    5.649474] PL310/L2C-310 cache controller enabled
<7>[    5.668968] kfuse_cache_isvalid=1
<6>[    5.671261] tegra_setup_i2c: skipping tegra_i2c.2 (SMBUS)
<4>[    5.685798] bio: create slab <bio-0> at 0
<5>[    5.686690] SCSI subsystem initialized
<6>[    5.687004] usbcore: registered new interface driver usbfs
<6>[    5.687135] usbcore: registered new interface driver hub
<6>[    5.687287] usbcore: registered new device driver usb
<6>[    5.688758] Bluetooth: Core ver 2.15
<6>[    5.688920] NET: Registered protocol family 31
<6>[    5.688927] Bluetooth: HCI device and connection manager initialized
<6>[    5.688940] Bluetooth: HCI socket layer initialized
<6>[    5.689963] Switching to clocksource timer_us
<6>[    5.694168] NET: Registered protocol family 2
<6>[    5.694245] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.694421] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.694626] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[    5.694840] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.694849] TCP reno registered
<6>[    5.694946] NET: Registered protocol family 1
<6>[    5.695075] Unpacking initramfs...
<6>[    5.703619] Freeing initrd memory: 164K
<4>[    5.704457] tegra_iovmm_register: added iovmm-gart
<4>[    5.706584] ==============>Msensor_ACTIVE
<6>[    5.706714] nvrm_init called
<4>[    5.706763] nvrm probe
<4>[    5.707780]
<4>[    5.707783] I2C Slave is *New*
<6>[    5.755354] ashmem: initialized
<6>[    5.765684] alg: No test for stdrng (krng)
<6>[    5.765717] io scheduler noop registered
<6>[    5.765725] io scheduler anticipatory registered
<6>[    5.765732] io scheduler deadline registered
<6>[    5.765787] io scheduler cfq registered (default)
<6>[    5.767678] tegra_grhost tegra_grhost: initialized
<4>[    5.768134] nvtegrafb: base address: d9000000 physical: 1fe76000
<4>[    5.768496] Console: switching to colour frame buffer device 100x30
<6>[    5.778203] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    5.778745] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[    6.333416] console [ttyS0] enabled
<6>[    6.333876] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[    6.343544] Registered UART port ttyHS1
<6>[    6.347416] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[    6.353984] Registered UART port ttyHS2
<6>[    6.357934] Initialized tegra uart driver
<6>[    6.364990] loop: module loaded
<3>[    6.581050] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    6.588554] usbcore: registered new interface driver cdc_ether
<6>[    6.594504] usbcore: registered new interface driver smsc9500
<6>[    6.600361] usbcore: registered new interface driver cdc_subset
<6>[    6.606320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    6.616228] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
<6>[    6.622196] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<6>[    6.660125] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
<6>[    6.682615] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[    6.688573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.695361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.702578] usb usb1: Product: Tegra Ehci host controller
<6>[    6.707967] usb usb1: Manufacturer: Linux 2.6.32.9-00044-g2b64cc5 ehci_hcd
<6>[    6.714836] usb usb1: SerialNumber: tegra-ehci.2
<6>[    6.719700] usb usb1: configuration #1 chosen from 1 choice
<6>[    6.725462] hub 1-0:1.0: USB hub found
<6>[    6.729227] hub 1-0:1.0: 1 port detected
<6>[    6.733263] tegra-ehci tegra-ehci.2: dmabounce: registered device
<6>[    6.739589] usbcore: registered new interface driver cdc_acm
<6>[    6.745255] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    6.753885] usbcore: registered new interface driver cdc_wdm
<6>[    6.759538] Initializing USB Mass Storage driver...
<6>[    6.764576] usbcore: registered new interface driver usb-storage
<6>[    6.770586] USB Mass Storage support registered.
<6>[    6.775455] usbcore: registered new interface driver usbserial
<6>[    6.781278] usbserial: USB Serial Driver core
<6>[    6.785763] USB Serial support registered for GSM modem (1-port)
<6>[    6.791897] usbcore: registered new interface driver option
<6>[    6.797458] option: v0.7.2:USB Driver for GSM modems
<6>[    6.802428] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<3>[    6.815209] tegra-udc tegra-udc.0: vbus_draw regulator error -19; charging disabled
<6>[    6.822986] android init
<6>[    6.825548] android_probe pdata: c057e730
<6>[    6.829659] android_bind
<7>[    6.832199] android_bind_config
<4>[    6.832207] Gadget Android: controller 'tegra-udc' not recognized
<6>[    6.838292] android_usb gadget: android_usb ready
<6>[    6.842993] tegra-udc: bind to driver android_usb
<6>[    6.850317] f_adb init
<6>[    6.852670] android_register_function adb
<6>[    6.856675] f_mass_storage init
<6>[    6.859807] android_register_function usb_mass_storage
<6>[    6.864949] mass_storage_bind_config
<6>[    6.868773] fsg_probe pdata: c057e958
<6>[    6.872729] android_usb gadget: Number of LUNs=1
<6>[    6.877339] adb_bind_config
<6>[    6.917702] input: nvec keyboard as /devices/virtual/input/input0
<7>[    6.923965] evbug.c: Connected device: input0 (nvec keyboard at unknown)
<6>[    6.924110] usbcore: registered new interface driver usbtouchscreen
<3>[    6.930447] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    6.936802] input: nvodm_touch as /devices/virtual/input/input1
<7>[    6.942897] evbug.c: Connected device: input1 (nvodm_touch at unknown)
<6>[    6.942907] nvodm_touch: Successfully registered the ODM touch driver d8adc004
<6>[    6.985984] input: nvec button as /devices/virtual/input/input2
<7>[    6.991917] nvec_button nvec_button: input device file is opened.
<7>[    6.992092] evbug.c: Connected device: input2 (nvec button at unknown)
<4>[    6.992290] [qci_finpoint]finpoint_init()
<3>[    6.996328] [qci_finpoint] finpoint_power(1)
<6>[    7.262015] android_usb gadget: high speed config #1: android
<6>[    7.607564] using rtc device, tegra_rtc_odm, for alarms
<6>[    7.612655] tegra_rtc_odm tegra_rtc_odm: rtc core: registered tegra_rtc_odm as rtc0
<6>[    7.620603] i2c /dev entries driver
<4>[    7.624650] XXXXXXXXXXXXXXX IR Probe XXXXXXXXXXXXXXX
<6>[    7.629872] input: qci_finpoint as /devices/virtual/input/input3
<7>[    7.636045] evbug.c: Connected device: input3 (qci_finpoint at unknown)
<4>[    7.636055] [qci_finpoint] write address = 0x3a , data = 0x5a
<4>[    7.842351] [qci_finpoint] write address = 0x60 , data = 0x84
<4>[    7.848441] [qci_finpoint] write address = 0x62 , data = 0x12
<4>[    7.854563] [qci_finpoint] write address = 0x63 , data = 0x0e
<4>[    7.860640] [qci_finpoint] write address = 0x77 , data = 0x21
<4>[    7.867208] [finpoint_init_panel]device id = 0x83
<3>[    7.871902] [finpoint_init_panel]device id = 0x83
<4>[    7.880408] [0x60]=0x84
<4>[    7.882868] [0x62]=0x12
<4>[    7.885308] [0x63]=0x0e
<4>[    7.887747] [0x64]=0x08
<4>[    7.890186] [0x65]=0x06
<4>[    7.892631] [0x66]=0x40
<4>[    7.895071] [0x67]=0x08
<4>[    7.897509] [0x68]=0x48
<4>[    7.899948] [0x69]=0x0a
<4>[    7.902385] [0x6a]=0x50
<4>[    7.904832] [0x6b]=0x48
<4>[    7.907272] [0x6d]=0xc4
<4>[    7.909710] [0x6e]=0x34
<4>[    7.912149] [0x6f]=0x3c
<4>[    7.914593] [0x70]=0x18
<4>[    7.917031] [0x71]=0x20
<4>[    7.919468] [0x73]=0x99
<4>[    7.921904] [0x74]=0x02
<4>[    7.924351] [0x75]=0x50
<4>[    7.926791] [0x77]=0x21
<4>[    7.929229] finpoint_init_client() success
<6>[    7.935944] Linux video capture interface: v2.00
<6>[    7.940894] usbcore: registered new interface driver uvcvideo
<6>[    7.946650] USB Video Class driver (v0.1.0)
<3>[    7.994457] tegra_thermal:registered
<6>[    7.999020] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[    8.007493] Bluetooth: HCI UART driver ver 2.2
<6>[    8.011930] Bluetooth: HCI H4 protocol initialized
<6>[    8.016726] Bluetooth: HCI BCSP protocol initialized
<6>[    8.021680] Bluetooth: HCILL protocol initialized
<6>[    8.026764] cpuidle: using governor ladder
<6>[    8.031532] cpuidle: using governor menu
<6>[    8.035577] sdhci: Secure Digital Host Controller Interface driver
<6>[    8.041746] sdhci: Copyright(c) Pierre Ossman
<4>[    8.048950] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[    8.055134] Registered led device: mmc0::
<6>[    8.059293] mmc0: SDHCI controller on tegra-sdhci.0 [tegra-sdhci.0] using ADMA
<6>[    8.066534] tegra-sdhci tegra-sdhci.0: probe complete
<4>[    8.073019] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[    8.079211] Registered led device: mmc1::
<6>[    8.083430] mmc1: SDHCI controller on tegra-sdhci.2 [tegra-sdhci.2] using ADMA
<6>[    8.090640] tegra-sdhci tegra-sdhci.2: probe complete
<4>[    8.096428] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[    8.102608] Registered led device: mmc2::
<6>[    8.106761] mmc2: SDHCI controller on tegra-sdhci.3 [tegra-sdhci.3] using ADMA
<6>[    8.113991] tegra-sdhci tegra-sdhci.3: probe complete
<6>[    8.119319] Registered led device: green
<6>[    8.124538] usbcore: registered new interface driver usbhid
<6>[    8.130107] usbhid: v2.6:USB HID core driver
<6>[    8.134805] logger: created 64K log 'log_main'
<6>[    8.139401] logger: created 256K log 'log_events'
<6>[    8.144272] logger: created 64K log 'log_radio'
<6>[    8.148944] logger: created 64K log 'log_system'
<4>[    8.154575] nf_conntrack version 0.5.0 (5982 buckets, 23928 max)
<4>[    8.160887] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    8.168270] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[    8.176246] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[    8.182715] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.188111] TCP cubic registered
<6>[    8.192402] NET: Registered protocol family 10
<6>[    8.197368] IPv6 over IPv4 tunneling driver
<6>[    8.202017] NET: Registered protocol family 17
<6>[    8.206561] Bluetooth: L2CAP ver 2.14
<6>[    8.210268] Bluetooth: L2CAP socket layer initialized
<6>[    8.215378] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    8.219951] Bluetooth: SCO socket layer initialized
<6>[    8.224984] Bluetooth: RFCOMM TTY layer initialized
<6>[    8.229916] Bluetooth: RFCOMM socket layer initialized
<6>[    8.235122] Bluetooth: RFCOMM ver 1.11
<6>[    8.238864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    8.244173] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    8.250254] ThumbEE CPU extension supported.
<5>[    8.254549] Registering SWP/SWPB emulation handler
<6>[    8.259348] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
<4>[    8.267773] regulator_init_complete: incomplete constraints, leaving vddio sys on
<4>[    8.275270] regulator_init_complete: incomplete constraints, leaving vddio ddr on
<4>[    8.282752] regulator_init_complete: incomplete constraints, leaving vddio bb on
<4>[    8.290136] regulator_init_complete: incomplete constraints, leaving soc_main on
<6>[    8.293578] mmc1: new high speed SDHC card at address b368
<6>[    8.293852] mmcblk2: mmc1:b368 SD    7.51 GiB
<6>[    8.307502]  mmcblk2:
<6>[    8.310320] tegra_rtc_odm tegra_rtc_odm: setting system clock to 2011-03-20 15:17:01 UTC (1300634221)
<6>[    8.319796] Freeing init memory: 172K
<4>[    8.323466]  p1
<3>[    8.326933] init: /init.rc: 234: invalid option 'chmod'
<3>[    8.332159] init: /init.rc: 234: invalid option 'start'
<3>[    8.337402] init: /init.rc: 234: invalid option 'chmod'
<6>[    8.463182] mmc2: new high speed MMC card at address 0001
<6>[    8.468903] mmcblk3: mmc2:0001 M8G2EM 7.45 GiB
<6>[    8.473572]  mmcblk3: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
<6>[    9.306683] kjournald starting.  Commit interval 5 seconds
<6>[    9.306701] EXT3-fs: mounted filesystem with ordered data mode.
<4>[    9.323784] EXT2-fs warning (device mmcblk3p6): ext2_fill_super: mounting ext3 filesystem as ext2
<4>[    9.332672] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<6>[   10.312316] kjournald starting.  Commit interval 5 seconds
<6>[   10.321066] EXT3 FS on mmcblk3p9, internal journal
<7>[   10.325868] ext3_orphan_cleanup: deleting unreferenced inode 876842
<6>[   10.325942] EXT3-fs: mmcblk3p9: 1 orphan inode deleted
<6>[   10.331088] EXT3-fs: recovery complete.
<6>[   10.578679] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.620304] kjournald starting.  Commit interval 5 seconds
<6>[   10.629312] EXT3 FS on mmcblk3p7, internal journal
<6>[   10.634114] EXT3-fs: recovery complete.
<6>[   10.641750] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.675113] kjournald starting.  Commit interval 5 seconds
<6>[   10.684143] EXT3 FS on mmcblk3p1, internal journal
<6>[   10.688931] EXT3-fs: recovery complete.
<6>[   10.696391] EXT3-fs: mounted filesystem with ordered data mode.
<3>[   10.813549] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[   10.836161] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[   10.843267] enabling adb
<6>[   10.862704] adb_open(adbd)
<6>[   11.004144] adb_release
<3>[   11.004502] init: sys_prop: permission denied uid:2000  name:adb.connected
<6>[   11.013749] adb_open(adbd)
<4>[   11.234284] NvRmIoctls_NvRmFbControl: deprecated
<6>[   11.262655] android_usb gadget: high speed config #1: android
<3>[   11.493609] init: sys_prop: permission denied uid:2000  name:adb.connected
<6>[   11.877066] ioModule=30, instance=0, config=1, enable=0
<4>[   13.658349] DTT: T = 46, Range = 1 (-64 : 60)
<6>[   14.262932] nvrm_notifier_store: nvrm_daemon=890
<6>[   14.267950] nvrm_notifier_show: blocking
<7>[   21.561595] CPU0 attaching NULL sched-domain.
<7>[   21.561634] CPU1 attaching NULL sched-domain.
<7>[   21.740293] CPU0 attaching NULL sched-domain.
<5>[   21.741345] CPU1: clean shutdown
<4>[   23.498165]
<4>[   23.498169] Dongle Host Driver, version 4.218.223.1
<6>[   23.616036] request_suspend_state: wakeup (3->0) at 19005939742 (2011-03-20 15:17:16.805719452 UTC)
<7>[   23.782536] mmc0: queuing CIS tuple 0x80 length 50
<7>[   23.834342] mmc0: queuing CIS tuple 0x80 length 7
<7>[   23.858025] mmc0: queuing CIS tuple 0x80 length 7
<7>[   24.012835] mmc0: queuing CIS tuple 0x02 length 1
<6>[   24.020325] mmc0: new SDIO card at address 0001
<4>[   24.650150] sdio_reset_comm():
<4>[   24.700022] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   24.951920] Firmware version = wl0: Jul  8 2010 15:59:50 version 4.218.243.0
<4>[   25.101556] CPU1: Booted secondary processor
<7>[   25.101639] CPU0 attaching NULL sched-domain.
<4>[   25.128912] wlan0: Broadcom Dongle Host Driver mac=48:5d:60:d8:5d:7f
<4>[   25.140199] Enter wl_control_wl_start
<7>[   25.152630] CPU0 attaching sched-domain:
<7>[   25.152642]  domain 0: span 0-1 level CPU
<7>[   25.152651]   groups: 0 1
<7>[   25.152667] CPU1 attaching sched-domain:
<7>[   25.152674]  domain 0: span 0-1 level CPU
<7>[   25.152681]   groups: 1 0
<4>[   25.155977] Exited wl_control_wl_start
<4>[   27.805950] Unkown PRIVATE command, ignored
<4>[   27.825285] Unkown PRIVATE command, ignored
<4>[   27.841457] Unkown PRIVATE command, ignored
<4>[   27.855679] Unkown PRIVATE command, ignored
<4>[   27.865279] Unkown PRIVATE command, ignored
<4>[   28.424438] STA connect received 1
<4>[   28.433726] STA disconnect received 6
<4>[   30.370742] STA connect received 1
<4>[   31.452465] Unkown PRIVATE command, ignored
<7>[   35.252377] wlan0: no IPv6 routers present
<4>[   36.478807] Unkown PRIVATE command, ignored
<7>[   39.176477] CPU0 attaching NULL sched-domain.
<7>[   39.176516] CPU1 attaching NULL sched-domain.
<7>[   39.220213] CPU0 attaching NULL sched-domain.
<5>[   39.221600] CPU1: clean shutdown
<4>[   44.640433] CPU1: Booted secondary processor
<7>[   44.640500] CPU0 attaching NULL sched-domain.
<7>[   44.710120] CPU0 attaching sched-domain:
<7>[   44.710132]  domain 0: span 0-1 level CPU
<7>[   44.710142]   groups: 0 1
<7>[   44.710156] CPU1 attaching sched-domain:
<7>[   44.710163]  domain 0: span 0-1 level CPU
<7>[   44.710171]   groups: 1 0
<7>[   46.122564] CPU0 attaching NULL sched-domain.
<7>[   46.122636] CPU1 attaching NULL sched-domain.
<7>[   46.230287] CPU0 attaching NULL sched-domain.
<5>[   46.231570] CPU1: clean shutdown
<7>[   52.538857] evbug.c: Event. Dev: input3, Type: 2, Code: 0, Value: -2

| コメント (0) | トラックバック (0)

トップページ | 2011年4月 »