トップページ | LifeTouch Noteのパーティーション(mmcblk3) »

2011年3月21日 (月)

LifeTouch NoteのLinuxカーネル機動メッセージ(/proc/kmsg)

<5>[    0.000000] Linux version 2.6.32.9-00044-g2b64cc5 (nec@Bryony) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Tue Jan 18 15:36:51 CST 2011

<4>[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: NVIDIA Harmony Development System
<4>[    0.000000] Framebuffer tag with 65536 handle
<4>[    0.000000] Shmoo tag with 65537 handle
<4>[    0.000000] Found a warmboot tag!
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 98304
<7>[    0.000000] free_area_init_node: node 0, pgdat c05ab940, node_mem_map c0698000
<7>[    0.000000]   DMA zone: 768 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 97536 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c09a4000 s11040 r8192 d13536 u65536
<6>[    0.000000] pcpu-alloc: s11040 r8192 d13536 u65536 alloc=16*4096
<6>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
<5>[    0.000000] Kernel command line: mem=384M@0M nvmem=128M@384M vmalloc=256M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 no_console_suspend tegraboot=sdmmc tegrapart=pt:600:80:800,bootloader:680:400:800,fdt:1180:12c00:800,recovery:13d80:a00:800,boot:14800:1000:800,mbr:b80:200:800,system:15880:18000:800,cache:2d900:12c00:800,misc:d80:400:800,staging:40580:1f400:800,userdata:5fa00:35b600:800
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 384MB = 384MB total
<5>[    0.000000] Memory: 382464KB available (5344K code, 1186K data, 172K init, 0K highmem)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:416
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    4.609343] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
<4>[    4.879342] Mount-cache hash table entries: 512
<6>[    4.879719] CPU: Testing write buffer coherency: ok
<6>[    4.879905] Calibrating local timer... 1.19MHz.
<4>[    4.989399] CPU1: Booted secondary processor
<6>[    5.259196] Brought up 2 CPUs
<6>[    5.259210] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
<7>[    5.259231] CPU0 attaching sched-domain:
<7>[    5.259242]  domain 0: span 0-1 level CPU
<7>[    5.259251]   groups: 0 1
<7>[    5.259268] CPU1 attaching sched-domain:
<7>[    5.259276]  domain 0: span 0-1 level CPU
<7>[    5.259284]   groups: 1 0
<6>[    5.283005] regulator: core version 0.5
<6>[    5.283388] NET: Registered protocol family 16
<4>[    5.283724] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x3 SKU: 0x8
<4>[    5.284366] NVRM Got shmoo boot argument (at 0xd8874004)
<4>[    5.284378] NVRM corner (2, 1)
<4>[    5.439163] NVRM CLOCKS: PLLX0:      1000000 Khz
<4>[    5.439174] NVRM CLOCKS: PLLM0:      666000 Khz
<4>[    5.439181] NVRM CLOCKS: PLLC0:      600000 Khz
<4>[    5.439187] NVRM CLOCKS: PLLP0:      216000 Khz
<4>[    5.439193] NVRM CLOCKS: PLLA0:      11289 Khz
<4>[    5.439199] NVRM CLOCKS: CPU:        1000000 Khz
<4>[    5.439205] NVRM CLOCKS: AVP:        240000 Khz
<4>[    5.439211] NVRM CLOCKS: System Bus: 240000 Khz
<4>[    5.439220] NVRM CLOCKS: Memory Controller: 333000
<4>[    5.439229] NVRM CLOCKS: External Memory Controller: 666000
<6>[    5.617532] regulator: lbee9qmb_vdd: 1700 <--> 2000 mV
<6>[    5.617800] regulator: soc_main: 0 mV
<6>[    5.618078] regulator: vddio bb: 1700 <--> 2000 mV
<6>[    5.618342] regulator: vddio lcd: 1700 <--> 2000 mV
<6>[    5.618607] regulator: vddio vi: 1700 <--> 2000 mV
<6>[    5.618868] regulator: vddio uart: 1700 <--> 2000 mV
<6>[    5.619172] regulator: vddio ddr: 1700 <--> 2000 mV
<6>[    5.619475] regulator: vddio nand: 1700 <--> 2000 mV
<6>[    5.619755] regulator: vddio sys: 1700 <--> 2000 mV
<6>[    5.620026] regulator: vddio audio: 1700 <--> 2000 mV
<6>[    5.620302] regulator: vddio sd: 1700 <--> 2000 mV
<4>[    5.626762] ADJUSTED CLOCKS:
<4>[    5.626776] MC clock is set to 333000 KHz
<4>[    5.626787] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
<4>[    5.626795] PLLX0 clock is set to 1000000 KHz
<4>[    5.626801] PLLC0 clock is set to 600000 KHz
<4>[    5.626807] CPU clock is set to 1000000 KHz
<4>[    5.626813] System and AVP clock is set to 240000 KHz
<4>[    5.626822] GraphicsHost clock is set to 111000 KHz
<4>[    5.626829] 3D clock is set to 111000 KHz
<4>[    5.626836] 2D clock is set to 111000 KHz
<4>[    5.626844] Epp clock is set to 111000 KHz
<4>[    5.626851] Mpe clock is set to 111000 KHz
<4>[    5.626857] Vde clock is set to 240000 KHz
<4>[    5.649426] Local timer scaling factor 2097, shift 24
<6>[    5.649474] PL310/L2C-310 cache controller enabled
<7>[    5.668968] kfuse_cache_isvalid=1
<6>[    5.671261] tegra_setup_i2c: skipping tegra_i2c.2 (SMBUS)
<4>[    5.685798] bio: create slab <bio-0> at 0
<5>[    5.686690] SCSI subsystem initialized
<6>[    5.687004] usbcore: registered new interface driver usbfs
<6>[    5.687135] usbcore: registered new interface driver hub
<6>[    5.687287] usbcore: registered new device driver usb
<6>[    5.688758] Bluetooth: Core ver 2.15
<6>[    5.688920] NET: Registered protocol family 31
<6>[    5.688927] Bluetooth: HCI device and connection manager initialized
<6>[    5.688940] Bluetooth: HCI socket layer initialized
<6>[    5.689963] Switching to clocksource timer_us
<6>[    5.694168] NET: Registered protocol family 2
<6>[    5.694245] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.694421] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.694626] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[    5.694840] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.694849] TCP reno registered
<6>[    5.694946] NET: Registered protocol family 1
<6>[    5.695075] Unpacking initramfs...
<6>[    5.703619] Freeing initrd memory: 164K
<4>[    5.704457] tegra_iovmm_register: added iovmm-gart
<4>[    5.706584] ==============>Msensor_ACTIVE
<6>[    5.706714] nvrm_init called
<4>[    5.706763] nvrm probe
<4>[    5.707780]
<4>[    5.707783] I2C Slave is *New*
<6>[    5.755354] ashmem: initialized
<6>[    5.765684] alg: No test for stdrng (krng)
<6>[    5.765717] io scheduler noop registered
<6>[    5.765725] io scheduler anticipatory registered
<6>[    5.765732] io scheduler deadline registered
<6>[    5.765787] io scheduler cfq registered (default)
<6>[    5.767678] tegra_grhost tegra_grhost: initialized
<4>[    5.768134] nvtegrafb: base address: d9000000 physical: 1fe76000
<4>[    5.768496] Console: switching to colour frame buffer device 100x30
<6>[    5.778203] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    5.778745] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[    6.333416] console [ttyS0] enabled
<6>[    6.333876] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[    6.343544] Registered UART port ttyHS1
<6>[    6.347416] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[    6.353984] Registered UART port ttyHS2
<6>[    6.357934] Initialized tegra uart driver
<6>[    6.364990] loop: module loaded
<3>[    6.581050] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    6.588554] usbcore: registered new interface driver cdc_ether
<6>[    6.594504] usbcore: registered new interface driver smsc9500
<6>[    6.600361] usbcore: registered new interface driver cdc_subset
<6>[    6.606320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    6.616228] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
<6>[    6.622196] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<6>[    6.660125] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
<6>[    6.682615] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[    6.688573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.695361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.702578] usb usb1: Product: Tegra Ehci host controller
<6>[    6.707967] usb usb1: Manufacturer: Linux 2.6.32.9-00044-g2b64cc5 ehci_hcd
<6>[    6.714836] usb usb1: SerialNumber: tegra-ehci.2
<6>[    6.719700] usb usb1: configuration #1 chosen from 1 choice
<6>[    6.725462] hub 1-0:1.0: USB hub found
<6>[    6.729227] hub 1-0:1.0: 1 port detected
<6>[    6.733263] tegra-ehci tegra-ehci.2: dmabounce: registered device
<6>[    6.739589] usbcore: registered new interface driver cdc_acm
<6>[    6.745255] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    6.753885] usbcore: registered new interface driver cdc_wdm
<6>[    6.759538] Initializing USB Mass Storage driver...
<6>[    6.764576] usbcore: registered new interface driver usb-storage
<6>[    6.770586] USB Mass Storage support registered.
<6>[    6.775455] usbcore: registered new interface driver usbserial
<6>[    6.781278] usbserial: USB Serial Driver core
<6>[    6.785763] USB Serial support registered for GSM modem (1-port)
<6>[    6.791897] usbcore: registered new interface driver option
<6>[    6.797458] option: v0.7.2:USB Driver for GSM modems
<6>[    6.802428] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<3>[    6.815209] tegra-udc tegra-udc.0: vbus_draw regulator error -19; charging disabled
<6>[    6.822986] android init
<6>[    6.825548] android_probe pdata: c057e730
<6>[    6.829659] android_bind
<7>[    6.832199] android_bind_config
<4>[    6.832207] Gadget Android: controller 'tegra-udc' not recognized
<6>[    6.838292] android_usb gadget: android_usb ready
<6>[    6.842993] tegra-udc: bind to driver android_usb
<6>[    6.850317] f_adb init
<6>[    6.852670] android_register_function adb
<6>[    6.856675] f_mass_storage init
<6>[    6.859807] android_register_function usb_mass_storage
<6>[    6.864949] mass_storage_bind_config
<6>[    6.868773] fsg_probe pdata: c057e958
<6>[    6.872729] android_usb gadget: Number of LUNs=1
<6>[    6.877339] adb_bind_config
<6>[    6.917702] input: nvec keyboard as /devices/virtual/input/input0
<7>[    6.923965] evbug.c: Connected device: input0 (nvec keyboard at unknown)
<6>[    6.924110] usbcore: registered new interface driver usbtouchscreen
<3>[    6.930447] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    6.936802] input: nvodm_touch as /devices/virtual/input/input1
<7>[    6.942897] evbug.c: Connected device: input1 (nvodm_touch at unknown)
<6>[    6.942907] nvodm_touch: Successfully registered the ODM touch driver d8adc004
<6>[    6.985984] input: nvec button as /devices/virtual/input/input2
<7>[    6.991917] nvec_button nvec_button: input device file is opened.
<7>[    6.992092] evbug.c: Connected device: input2 (nvec button at unknown)
<4>[    6.992290] [qci_finpoint]finpoint_init()
<3>[    6.996328] [qci_finpoint] finpoint_power(1)
<6>[    7.262015] android_usb gadget: high speed config #1: android
<6>[    7.607564] using rtc device, tegra_rtc_odm, for alarms
<6>[    7.612655] tegra_rtc_odm tegra_rtc_odm: rtc core: registered tegra_rtc_odm as rtc0
<6>[    7.620603] i2c /dev entries driver
<4>[    7.624650] XXXXXXXXXXXXXXX IR Probe XXXXXXXXXXXXXXX
<6>[    7.629872] input: qci_finpoint as /devices/virtual/input/input3
<7>[    7.636045] evbug.c: Connected device: input3 (qci_finpoint at unknown)
<4>[    7.636055] [qci_finpoint] write address = 0x3a , data = 0x5a
<4>[    7.842351] [qci_finpoint] write address = 0x60 , data = 0x84
<4>[    7.848441] [qci_finpoint] write address = 0x62 , data = 0x12
<4>[    7.854563] [qci_finpoint] write address = 0x63 , data = 0x0e
<4>[    7.860640] [qci_finpoint] write address = 0x77 , data = 0x21
<4>[    7.867208] [finpoint_init_panel]device id = 0x83
<3>[    7.871902] [finpoint_init_panel]device id = 0x83
<4>[    7.880408] [0x60]=0x84
<4>[    7.882868] [0x62]=0x12
<4>[    7.885308] [0x63]=0x0e
<4>[    7.887747] [0x64]=0x08
<4>[    7.890186] [0x65]=0x06
<4>[    7.892631] [0x66]=0x40
<4>[    7.895071] [0x67]=0x08
<4>[    7.897509] [0x68]=0x48
<4>[    7.899948] [0x69]=0x0a
<4>[    7.902385] [0x6a]=0x50
<4>[    7.904832] [0x6b]=0x48
<4>[    7.907272] [0x6d]=0xc4
<4>[    7.909710] [0x6e]=0x34
<4>[    7.912149] [0x6f]=0x3c
<4>[    7.914593] [0x70]=0x18
<4>[    7.917031] [0x71]=0x20
<4>[    7.919468] [0x73]=0x99
<4>[    7.921904] [0x74]=0x02
<4>[    7.924351] [0x75]=0x50
<4>[    7.926791] [0x77]=0x21
<4>[    7.929229] finpoint_init_client() success
<6>[    7.935944] Linux video capture interface: v2.00
<6>[    7.940894] usbcore: registered new interface driver uvcvideo
<6>[    7.946650] USB Video Class driver (v0.1.0)
<3>[    7.994457] tegra_thermal:registered
<6>[    7.999020] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[    8.007493] Bluetooth: HCI UART driver ver 2.2
<6>[    8.011930] Bluetooth: HCI H4 protocol initialized
<6>[    8.016726] Bluetooth: HCI BCSP protocol initialized
<6>[    8.021680] Bluetooth: HCILL protocol initialized
<6>[    8.026764] cpuidle: using governor ladder
<6>[    8.031532] cpuidle: using governor menu
<6>[    8.035577] sdhci: Secure Digital Host Controller Interface driver
<6>[    8.041746] sdhci: Copyright(c) Pierre Ossman
<4>[    8.048950] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[    8.055134] Registered led device: mmc0::
<6>[    8.059293] mmc0: SDHCI controller on tegra-sdhci.0 [tegra-sdhci.0] using ADMA
<6>[    8.066534] tegra-sdhci tegra-sdhci.0: probe complete
<4>[    8.073019] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[    8.079211] Registered led device: mmc1::
<6>[    8.083430] mmc1: SDHCI controller on tegra-sdhci.2 [tegra-sdhci.2] using ADMA
<6>[    8.090640] tegra-sdhci tegra-sdhci.2: probe complete
<4>[    8.096428] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[    8.102608] Registered led device: mmc2::
<6>[    8.106761] mmc2: SDHCI controller on tegra-sdhci.3 [tegra-sdhci.3] using ADMA
<6>[    8.113991] tegra-sdhci tegra-sdhci.3: probe complete
<6>[    8.119319] Registered led device: green
<6>[    8.124538] usbcore: registered new interface driver usbhid
<6>[    8.130107] usbhid: v2.6:USB HID core driver
<6>[    8.134805] logger: created 64K log 'log_main'
<6>[    8.139401] logger: created 256K log 'log_events'
<6>[    8.144272] logger: created 64K log 'log_radio'
<6>[    8.148944] logger: created 64K log 'log_system'
<4>[    8.154575] nf_conntrack version 0.5.0 (5982 buckets, 23928 max)
<4>[    8.160887] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    8.168270] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[    8.176246] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[    8.182715] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.188111] TCP cubic registered
<6>[    8.192402] NET: Registered protocol family 10
<6>[    8.197368] IPv6 over IPv4 tunneling driver
<6>[    8.202017] NET: Registered protocol family 17
<6>[    8.206561] Bluetooth: L2CAP ver 2.14
<6>[    8.210268] Bluetooth: L2CAP socket layer initialized
<6>[    8.215378] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    8.219951] Bluetooth: SCO socket layer initialized
<6>[    8.224984] Bluetooth: RFCOMM TTY layer initialized
<6>[    8.229916] Bluetooth: RFCOMM socket layer initialized
<6>[    8.235122] Bluetooth: RFCOMM ver 1.11
<6>[    8.238864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    8.244173] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    8.250254] ThumbEE CPU extension supported.
<5>[    8.254549] Registering SWP/SWPB emulation handler
<6>[    8.259348] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
<4>[    8.267773] regulator_init_complete: incomplete constraints, leaving vddio sys on
<4>[    8.275270] regulator_init_complete: incomplete constraints, leaving vddio ddr on
<4>[    8.282752] regulator_init_complete: incomplete constraints, leaving vddio bb on
<4>[    8.290136] regulator_init_complete: incomplete constraints, leaving soc_main on
<6>[    8.293578] mmc1: new high speed SDHC card at address b368
<6>[    8.293852] mmcblk2: mmc1:b368 SD    7.51 GiB
<6>[    8.307502]  mmcblk2:
<6>[    8.310320] tegra_rtc_odm tegra_rtc_odm: setting system clock to 2011-03-20 15:17:01 UTC (1300634221)
<6>[    8.319796] Freeing init memory: 172K
<4>[    8.323466]  p1
<3>[    8.326933] init: /init.rc: 234: invalid option 'chmod'
<3>[    8.332159] init: /init.rc: 234: invalid option 'start'
<3>[    8.337402] init: /init.rc: 234: invalid option 'chmod'
<6>[    8.463182] mmc2: new high speed MMC card at address 0001
<6>[    8.468903] mmcblk3: mmc2:0001 M8G2EM 7.45 GiB
<6>[    8.473572]  mmcblk3: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
<6>[    9.306683] kjournald starting.  Commit interval 5 seconds
<6>[    9.306701] EXT3-fs: mounted filesystem with ordered data mode.
<4>[    9.323784] EXT2-fs warning (device mmcblk3p6): ext2_fill_super: mounting ext3 filesystem as ext2
<4>[    9.332672] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<6>[   10.312316] kjournald starting.  Commit interval 5 seconds
<6>[   10.321066] EXT3 FS on mmcblk3p9, internal journal
<7>[   10.325868] ext3_orphan_cleanup: deleting unreferenced inode 876842
<6>[   10.325942] EXT3-fs: mmcblk3p9: 1 orphan inode deleted
<6>[   10.331088] EXT3-fs: recovery complete.
<6>[   10.578679] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.620304] kjournald starting.  Commit interval 5 seconds
<6>[   10.629312] EXT3 FS on mmcblk3p7, internal journal
<6>[   10.634114] EXT3-fs: recovery complete.
<6>[   10.641750] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.675113] kjournald starting.  Commit interval 5 seconds
<6>[   10.684143] EXT3 FS on mmcblk3p1, internal journal
<6>[   10.688931] EXT3-fs: recovery complete.
<6>[   10.696391] EXT3-fs: mounted filesystem with ordered data mode.
<3>[   10.813549] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[   10.836161] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[   10.843267] enabling adb
<6>[   10.862704] adb_open(adbd)
<6>[   11.004144] adb_release
<3>[   11.004502] init: sys_prop: permission denied uid:2000  name:adb.connected
<6>[   11.013749] adb_open(adbd)
<4>[   11.234284] NvRmIoctls_NvRmFbControl: deprecated
<6>[   11.262655] android_usb gadget: high speed config #1: android
<3>[   11.493609] init: sys_prop: permission denied uid:2000  name:adb.connected
<6>[   11.877066] ioModule=30, instance=0, config=1, enable=0
<4>[   13.658349] DTT: T = 46, Range = 1 (-64 : 60)
<6>[   14.262932] nvrm_notifier_store: nvrm_daemon=890
<6>[   14.267950] nvrm_notifier_show: blocking
<7>[   21.561595] CPU0 attaching NULL sched-domain.
<7>[   21.561634] CPU1 attaching NULL sched-domain.
<7>[   21.740293] CPU0 attaching NULL sched-domain.
<5>[   21.741345] CPU1: clean shutdown
<4>[   23.498165]
<4>[   23.498169] Dongle Host Driver, version 4.218.223.1
<6>[   23.616036] request_suspend_state: wakeup (3->0) at 19005939742 (2011-03-20 15:17:16.805719452 UTC)
<7>[   23.782536] mmc0: queuing CIS tuple 0x80 length 50
<7>[   23.834342] mmc0: queuing CIS tuple 0x80 length 7
<7>[   23.858025] mmc0: queuing CIS tuple 0x80 length 7
<7>[   24.012835] mmc0: queuing CIS tuple 0x02 length 1
<6>[   24.020325] mmc0: new SDIO card at address 0001
<4>[   24.650150] sdio_reset_comm():
<4>[   24.700022] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   24.951920] Firmware version = wl0: Jul  8 2010 15:59:50 version 4.218.243.0
<4>[   25.101556] CPU1: Booted secondary processor
<7>[   25.101639] CPU0 attaching NULL sched-domain.
<4>[   25.128912] wlan0: Broadcom Dongle Host Driver mac=48:5d:60:d8:5d:7f
<4>[   25.140199] Enter wl_control_wl_start
<7>[   25.152630] CPU0 attaching sched-domain:
<7>[   25.152642]  domain 0: span 0-1 level CPU
<7>[   25.152651]   groups: 0 1
<7>[   25.152667] CPU1 attaching sched-domain:
<7>[   25.152674]  domain 0: span 0-1 level CPU
<7>[   25.152681]   groups: 1 0
<4>[   25.155977] Exited wl_control_wl_start
<4>[   27.805950] Unkown PRIVATE command, ignored
<4>[   27.825285] Unkown PRIVATE command, ignored
<4>[   27.841457] Unkown PRIVATE command, ignored
<4>[   27.855679] Unkown PRIVATE command, ignored
<4>[   27.865279] Unkown PRIVATE command, ignored
<4>[   28.424438] STA connect received 1
<4>[   28.433726] STA disconnect received 6
<4>[   30.370742] STA connect received 1
<4>[   31.452465] Unkown PRIVATE command, ignored
<7>[   35.252377] wlan0: no IPv6 routers present
<4>[   36.478807] Unkown PRIVATE command, ignored
<7>[   39.176477] CPU0 attaching NULL sched-domain.
<7>[   39.176516] CPU1 attaching NULL sched-domain.
<7>[   39.220213] CPU0 attaching NULL sched-domain.
<5>[   39.221600] CPU1: clean shutdown
<4>[   44.640433] CPU1: Booted secondary processor
<7>[   44.640500] CPU0 attaching NULL sched-domain.
<7>[   44.710120] CPU0 attaching sched-domain:
<7>[   44.710132]  domain 0: span 0-1 level CPU
<7>[   44.710142]   groups: 0 1
<7>[   44.710156] CPU1 attaching sched-domain:
<7>[   44.710163]  domain 0: span 0-1 level CPU
<7>[   44.710171]   groups: 1 0
<7>[   46.122564] CPU0 attaching NULL sched-domain.
<7>[   46.122636] CPU1 attaching NULL sched-domain.
<7>[   46.230287] CPU0 attaching NULL sched-domain.
<5>[   46.231570] CPU1: clean shutdown
<7>[   52.538857] evbug.c: Event. Dev: input3, Type: 2, Code: 0, Value: -2

トップページ | LifeTouch Noteのパーティーション(mmcblk3) »

LifeTouch Note」カテゴリの記事

コメント

コメントを書く



(ウェブ上には掲載しません)




トラックバック


この記事へのトラックバック一覧です: LifeTouch NoteのLinuxカーネル機動メッセージ(/proc/kmsg):

トップページ | LifeTouch Noteのパーティーション(mmcblk3) »